Accutire MS-5510B Racing Tire Gauge
December 29, 2009 | Posted by elvin 
- The most accurate tire gauge available
- Reads tire pressures from 0-60PSI in 01 increments
- The quick disconnect insures a positive attachment
- Easy to read blue back-lit display
- Bleed valve to drop tire pressure to desired pressure
Product Description
This is the ultimate tire gauge for the performance enthusiast. If you like to have the best tool available, this is the gauge for you. The MS5510B is the most accurate tire gauge available. It reads tire pressure from 0 to 60PSI in .01 increments, with a large, back-lit LCD screen to make it easy to read. The convenient bleed valve makes it easy to drop the pressure if you overinflate. If you have a motorcycle, an off-road vehicle, ATV or performance car, get the most out of your expensive tires with accurate, consistent inflation.
Accutire MS-5510B Racing Tire Gauge
Categories: Accutire, Hot Pick | 
Tags: Accutire, Gauge, MS5510B, Racing, Tire | 
5 Comments »
YOUR PRODUCT WAS AS ADVERTISED AND ARRIVED NEARLY IMMEDIATELY AFTER ORDERING. SUCH A GOOD FEELING TO GET ECELLENT SERVICE THESE DAYS.
FRANK N ARIHOOD
LAFAYETTE, IN
Rating: 5 / 5
Ordered this on sale from Amazon. When I opened the blister package, the air release button and spring fell out. Gauge was defective before I could even try it out. Sent it back for a replacement. We’ll see how that goes.
Postscript:
I got the replace and the gauge works fine, but for some odd reason they put the stiffest hose I have ever seen on this gauge. I give it two starts as the cheap, stiff hose makes it quite awkward to use. If it had a higher quality hose on it, I would give it four stars.
Rating: 1 / 5
I wanted a digital tire monitor becuz theyre supposed to be more accurate than the stick models. This gauge comes with instructions and is fairly easy to use. My favorite part of this gauge is the bleed valve. With other gauges, you have to put in air, then check the gauge, put in air, check it again. With this gauge, you can overinflate your tires a little bit, then bleed the air out with the valve til you reach your desired PSI.
Assuming this lasts a long time, I would recommend it to everyone.
Rating: 5 / 5
Accutire makes accurate gauges, that I know, but my gauge does not seal properly, loses air and the inflexible hose makes it difficult to take pressures, and you really have to press down on the valve to get a good reading. Its ok, but a lot of trouble for something that should work flawlessly since it really is only a tire gauge.
Rating: 3 / 5
I WORK WITH DRAGSTER AND COMP CARS WE NEED TO HAVE EQUAL TIRE PRESSURE THIS WORKS GREAT
Rating: 5 / 5